Introduction

If you belong to the agricultural sector, you must be aware of the importance to use right bearings in agricultural sectors so that the agricultural equipment must be able to withstand, corrosion, vibrations, and hard mechanical influences.  Some of the most common bearings used in agricultural sectors are listed below:

• Deep-Groove Ball Bearings
• Angular Contact Ball Bearings
• Tapered Roller Bearings
• Ball Bearing Units

Apart from mechanical influences, your agricultural machinery can also be affected by bad weather conditions. There can be drought, rain, winters, and higher temperature changes. To deal with most of these issues, bearings are recommended in agricultural applications. If you don’t know anything about agricultural bearings. Don’t Worry! Continue reading this blog.

Deep-Groove Ball Bearings

These bearings are quite similar to traditional bearings. Deep groove ball bearing consists of raceways that can easily fit the dimensions of balls to run in them. In other words, the deep grooves result in stable balls. Moreover, they have got the ability to deal with higher loads.

Angular Contact Ball Bearings

Angular contact ball bearing possesses outer and inner ring raceways. These raceways got the ability to displace themselves from each other in the bearing axis direction. It is another most commonly used bearing in agricultural equipment. The best part about them is that they are designed in such a way that combined load is easily accommodated.

Tapered Roller Bearings

Tapered roller bearings feature a cone and cup assembly. Note that the outer ring refers to the cup while the inner ring refers to the cone. In the other words, the assembly of cones is comprised of a cage, rollers, and an inner ring. It accommodates low friction and combined load during operation.

Ball Bearing Units

Ball-bearing units are known to be particularly used in the agricultural sector. The basic purpose of bearing housing is to protect your bearings from contamination. Moreover, they can house the monitoring equipment while keeping your bearings in lubrication. In other words, bearing housing units maximize performance and the service life of bearings.

Where Do You Use The Bearings In Agricultural Industry?

Agricultural bearings play an important role in the efficient functioning of your machines. Some agricultural applications that use bearings are listed below :

• Hydraulic cylinders
• Kingpins
• Tractors
• Steering and suspension systems
• Cotton pickers and strippers
• Pedals
• Combines
• Hinges
• Harvesting Equipment
• Linkage and Pivot Point
• Seeding equipment
• Tillage
• Silo unloaders
• Balers
• Mowers
• Planters
• Disc Harrows

What Factors To Consider When Choosing Bearings For Agricultural Applications?

Purchasing bearings for your agricultural equipment might be a difficult task especially when you are a beginner. You have to choose the right manufacturer or supplier and consider some important factors. If purchasing the high-quality bearing is first priority for you, then don’t forget to look for the following factors:

Load

The first and most important factor is to measure the load of bearing. Honestly speaking, you will find many ways to measure the bearing load more effectively. Radial load is exerted on the shaft at the right angle. On the other hand, measuring the forces acting in the same direction refers to the axial load. Radial load and axial load together create a moment. Make sure your bearings are capable of adjusting all these three loads.  

Tolerance

The next factor to consider is the tolerance of agricultural bearings. For machines that have to work at high speeds, it is necessary to have an accuracy level of 5 or higher.

Speed

Speed plays important role in figuring out the right bearing. It is interesting to note that every bearing works under a specific speed range. You cannot use the same bearings in a system that runs slow and a system that needs to run fast. Make sure you buy the bearings according to the speed requirement of your machine.

Temperature

Temperature can highly affect the working of your agricultural equipment. When bearings work in your equipment, they cause heat generation. This may affect the functioning of the machine. Make sure that your bearing is lubricated perfectly.

Other Factors:

• Rotation Accuracy
• Rigidity
• Friction Torque
• Noise level
• Service life
• Material specifications and standards
• Industry regulations
• Chemical resistance
• Anti-wear properties
• Corrosion resistance

Selection of the right supplier is as important as selecting the right bearings for your agricultural machinery. There are suppliers and traders. Note that suppliers can give you customized and cheaper bearings as compared to traders. However, you can decide between the two based on what suits your requirements the most.

Conclusion

Installation of the right bearings in farm machinery is important to get the most out of your machine. Bearings have an essential role in agricultural applications for the proper functioning of equipment. Make sure that you partner with the right supplier to purchase the agricultural bearings. It may be hard for you to choose the right supplier but conducting meaningful research through the internet can be very helpful.